BONA-GM-22

Nanofiltration membrane experimental filtration equipment

♦ Minimum circulating volume: about 3L;

♦ Material tank: 10L (jacket);

♦ Working pressure: 0-0.4MPa;

♦ Working temperature: 0-80 ℃;

♦ Cleaning temperature: 60-70 ℃;

♦ Pump power: 0.75KW;

♦ PH applicable range: 0-14;

♦ Filtration rate: 1-10L/H;

♦ Power supply: AC/220V;

♦ Equipment size: 900 (length) × 450 (width) × 1300 (height) mm;

Click to consult online customer service

Product Introduction Product Features Basic configuration Typical application areas Partial user units Bona Technology Advantages

Product Introduction

The experimental separation equipment BONA-GM-22 for nanofiltration membranes can be replaced with ceramic membrane components with different pore sizes (UF, MF). Widely used in fields such as biology, pharmaceuticals, food, chemicals, environmental protection, etc., for process experiments such as separation, purification, clarification, and sterilization of feed liquids. It can replace traditional processes such as plate and frame filtration, centrifugal separation, solvent extraction, natural sedimentation, and diatomaceous earth filtration. It can reduce the amount of activated carbon used during decolorization, improve the adsorption efficiency of resin adsorption, and extend the regeneration cycle of ion exchange resin. The Ceramic membrane filtration separation technology has the advantages of fast filtration speed, high yield, good quality, low operation cost, long service life, etc.

Product Features

1. The experimental machine adopts integrated manufacturing, with simple equipment operation and equipped with casters, making it easy to move. The surface of the equipment has no sanitary dead corners and meets GMP requirements;

2. The system is equipped with a clear liquid flow meter, which can directly read the clear liquid flux;

3. The internal and external surfaces of equipment pipelines are of excellent quality, smooth and flat, clean and hygienic, safe and reliable, ensuring the pressure resistance and corrosion resistance of the equipment.

4. The equipment support is brushed/polished, and the fillet welds, external butt welds, and nozzle ends are polished smooth and flush.

5. The pump is equipped with protection functions such as over temperature automatic protection, over pressure automatic protection, and low liquid level automatic protection, ensuring the absolute safety of experimental materials and equipment.

6. Other precision ceramic membrane components (20nm-1400nm) can be replaced.

7. The membrane components have passed the testing of GB4086.4-2016 and GB/T26572-2011.

8. The membrane shell adopts automatic argon filling protection, with single side welding and double-sided molding, ensuring safety and hygiene.

Basic configuration

One feed pump, two SUS316L membrane shells, one pressure sensor, one temperature sensor, one conductivity meter, one material tank, one pressure regulating valve, two Ceramic membrane elements, several pipes and connectors, one rack, one overpressure automatic protection system, and one overtemperature automatic protection system.