MDJM-3-3

Multi enzyme cascade reactor

♦ Design pressure: Multi enzyme pump operates at normal pressure; Long term operation of organic membrane pump ≤ 0.8MPa; Short term operation of organic membrane pump ≤ 1.0MPa;

♦ Material tank: 2L (with jacket for hot and cold water supply);

♦ Reactor: 100ml;

♦ Operating temperature: 4-55 ℃;

♦ Cleaning temperature: 30-55 ℃;

♦ PH applicable range: 2-12;

♦ Power supply voltage: AC/220V;

Click to consult online customer service

Product Introduction Product Features Basic configuration Typical application areas Partial user units Bona Technology Advantages

Product Introduction

The multi enzyme cascade reactor MDJM-3-3 adopts a multi enzyme multi-stage mixing reaction and organic membrane cross flow filtration method, using materials to mix in the mixing tank and enter the reaction tank. The equipment is divided into three stages of tubular reaction, with the fluid passing through the shell layer and equipped with a baffle plate. The baffle plate has an area of two-thirds of the reaction tube cross-sectional area, and there is a tubular heat exchange system inside, with an external constant temperature bath to provide cooling and heating medium. After the enzyme reaction, it can enter the corresponding organic membrane for filtration. After the reaction, the liquid flows at high speed on the surface of the organic membrane and provides a certain pressure, allowing small molecule substances to vertically pass through the membrane surface, while the intercepted large molecule materials are washed away.

Product Features

1. There are no welding points in the pipeline where the equipment and materials come into contact, ensuring the equipment's pressure resistance and corrosion resistance. Easy to operate, clean and hygienic, safe and reliable;

2. The equipment power supply adopts dual switch control, and the low-voltage power supply operates to fully ensure the safety of equipment and personnel;

3. Three stage tubular reaction, with a baffle plate inside the reactor, a tubular heat exchange system, an external constant temperature bath, providing cooling and heating medium, a temperature range of 5-50 degrees, and at least three sampling ports in the reactor. Using SL static mixer for mixing;

4. Equipped with a three-level membrane filtration system for material recovery in multiple three-level tubular reactors, equipped with 10 types of membrane elements, including 10KD, 20KD, 30KD, 40KD, 50KD, 60KD, 70KD, 80KD, 90KD, and 100KD each;

5. Adopting touch screen control: reaction stage and feed pump can be selected;

6. Each stage of tubular reactor and membrane filtration is equipped with a circulating pump, which can be used for material circulation and enzyme recycling;

7. Equipped with 10 storage tanks, each with a volume of 2L.

Basic configuration

10 feeding pumps; 10 sets of material tanks; One set of mixing tank; 3 reactors; Three pressure regulating valves; Six sets of solenoid valves; Pipeline accessories; One set of high and low temperature circulating temperature control device; Three SUS316L stainless steel membrane components; Six sets of temperature sensors; Three sets of pressure sensors; One set of PLC+touch screen; Ten sets of membrane components.