1. Sampling settings

0s-3600s, which can meet the requirements of small penetration liquid and can run continuously for a long time (over 30 days, there may be 5-10 minute errors in daily continuous sampling for a long time, which can be eliminated after restarting).

During the interval, it is possible to keep sampling without recording.

2. Conductivity

Conductivity meter configuration beaker 10ml sampling speed (0.09-1.5ml/min)

The conductivity reading is small, and the liquid is about 4ml

Select 9 conductivity meters with a range of 0-3000 μ S/cm (test penetrant) and two 0-100ms/cm (test raw liquid in the material barrel).

3. Weight

The weighing range of the balance is 0.01-300g, with 9 sets.

The balance is equipped with two sets of beakers, 10ml and 100ml, for switching to meet the needs of short-term sampling quality and cumulative sampling weighing.

4. PH

Two sets of pH meter can measure the pH value of raw water in the material tank from 0 to 14.

5. Pressure

7 pressure sensors with a range of 0-10MPa.

6. Pump

2 material output pumps, equipped with 18 pump heads. Two sets of pumps can be selected: automatic mode (two pumps run in sequence), and the permeate after testing can be returned to the raw material tank. Manual mode (the front pump runs, the second pump reaches a liquid level of 90% in the beaker, and automatically starts discharging back to the material tank). The working part of the pump is not exposed and is equipped with a protective cover for protection.

The quick insertion method is convenient for disassembly (from the membrane pool to the equipment beaker, it is a capillary tube, and the pump pipeline is a regular silicone tube, for the convenience of quick pump withdrawal).

7. Display screen

The display screen can display in real-time the weight and conductivity of the permeate from 9 membrane tanks, the conductivity, pH, and temperature of the original solution, and 7 pressures (including the inlet and outlet pressure of the three sets of pipelines and the total inlet pressure).

It can record various data and form curves, and can be exported from external computers and USB drives.

1. Conducted at room temperature, under mild conditions without component damage, particularly suitable for heat sensitive substances;

2. It can meet the filtration requirements of customers with different accuracies, with uniform pore size distribution, and can achieve the purification and concentration of effective ingredients in the feed liquid;

3. The system is designed for cross flow operation, without the need for adding filter aids and introducing new impurities, completely solving the problem of pollution and blockage;

4. Modular design of the system, convenient replacement of filter materials, design of online regeneration cleaning and sewage discharge devices, reduce labor intensity and production costs, and improve production efficiency;

5. The system is easy to operate, has a short process, and is easy to clean and maintain;

6. Select stainless steel sanitary materials that comply with QS quality standards;

7. The membrane filtration element has a large filling area and a small system footprint, making it convenient for technical improvement, expansion, or new construction projects, effectively reducing investment and production costs.