BONA-GM-22H

Ceramic membrane filtration experimental machine

♦ Minimum circulating volume: 0.5L;

♦ Material tank: 5L jacket;

♦ Working pressure: 0-0.6MPa;

♦ Allowable working temperature: 0-80 ℃;

♦ Pump power: 0.75KW;

♦ PH range: 0-14;

♦ Filtration rate: 1-10L/H;

♦ Power supply: AC/220V;

♦ Equipment size: 830 (length) × 450 (width) × 930 (height) mm;

Click to consult online customer service

Product Introduction Product Features Basic configuration Typical application areas Partial user units Bona Technology Advantages

Product Introduction

The Ceramic membrane filtration experimental machine BONA-GM-22H can replace Ceramic membrane elements (UF, MF) with different pore diameters. Widely used in fields such as biology, pharmaceuticals, food, chemicals, environmental protection, etc., for process experiments such as separation, purification, clarification, and sterilization of feed liquids. It can replace traditional processes such as plate and frame filtration, centrifugal separation, solvent extraction, natural sedimentation, and diatomaceous earth filtration. It can reduce the amount of activated carbon used during decolorization, improve the adsorption efficiency of resin adsorption, and extend the regeneration cycle of ion exchange resin. The Ceramic membrane filtration separation technology has the advantages of fast filtration speed, high yield, good quality, low operation cost, long service life, etc.

Product Features

1. The experimental machine adopts integrated manufacturing, with simple equipment operation and equipped with casters, making it easy to move. The surface of the equipment has no sanitary dead corners and meets GMP requirements;

2. The system is equipped with a clear liquid flow meter, which can directly read the clear liquid flux;

3. The internal and external surfaces of equipment pipelines are of excellent quality, smooth and flat, clean and hygienic, safe and reliable, ensuring the pressure resistance and corrosion resistance of the equipment;

4. Equipment support wire drawing/polishing treatment, corner welds, external butt welds, and nozzle ends polished smooth and flush;

5. The pump is equipped with automatic protection functions for over temperature and over pressure, achieving automatic shutdown for over temperature and over pressure, ensuring the safety and reliability of experimental materials and equipment;

6. Other precision Ceramic membrane elements (20nm-1400nm) can be replaced;

7. The membrane components have passed the testing of GB4086.4-2016 and GB/T26572-2011;

8. The membrane shell adopts automatic argon filling protection, with single side welding and double-sided molding, ensuring safety and hygiene.

Basic configuration

One feed pump, one SUS316L membrane housing, one set of pressure sensors, one set of temperature sensors, one set of material tanks, one set of pressure regulating valves, three ceramic membrane components, several pipelines and their connections, one set of rack, one set of overpressure automatic protection system, and one set of overheating automatic protection system.